Nylon cable magnetic plastic refers to the plastic with magnetic action, is a kind of polymer material permanent magnet material.Alias plastic magnet, plastic magnet is widely used because of easy forming production and processing, high precision, thick wall, miscellaneous crafts. With magnetic plastic there are two kinds of structure and compound, structure refers to the plastic itself with strong magnetic, such as Japan's PPH[(poly double one 2.6 a pikeo Xin two eyes) ferric sulfate].

In addition, the iron ions of polycartene and polyschiff base are structured plastic magnets. Composite plastic magnets are made of resin materials as plates and mixed with magnetic powder, which are plastic magnets for specific application at the present stage. Common plates are PE, PP, EVA, PPS, PBT, nylon cable PV ', polyester 6, polyester 66, polyester 12, epoxy resin glue.Urea formaldehyde resin, magnetic powder ferrite core, x10 'A/ni, ferrite core plastic magnet larger magnetic energy product ((31.8 to 55.7)x10' A/ni)((0.4 to 0.7)X1 protection Oe), covered subfilm non-woven bag X10 plastic magnet magnetic energy product is 10 times higher, therefore,The latter is more suitable for making small and medium-sized electrical products.

Overseas plastic magnets have a rapid development trend, accounting for 15% of the total use of magnets at the present stage. The key is ferrite core plastic magnets, nylon cable ties and many parts for the rotor and stator of miniature high-precision motors, refrigerator door sealing magnets, TV, tape-recorder, camera, phone, sound box and other electrical products.

The opacity of nylon cable paper plate and metal packaging raw materials and the easy breakability of glassy packaging products are the traditional packaging products can not escape the problem, while transparent plastic has both compatibility and impact resistance.

Many periods of nylon cable material packaging products have very good compatibility.Good compatibility of plastic.The transmittance reaches 92%, which is higher than that of inorganic glass rayon. Compared with inorganic glass rayon, transparent plastic not only has a small relative density, but also further increases its destructive power. For example, polycarbonate packaging products selected for drinking plastic buckets have a relative density of only 1/2 that of inorganic glass rayon, and the impact compressive strength is 250 times that of inorganic glass rayon.

The improvement of impact resistance means that the safety factor of goods is improved.Resulting in damage, tipping and environmental pollution probability is greatly reduced, extrusion forming is called flame retardant plastic or extrusion molding processing technology, plastic raw materials in the rotation of the extruder screw and cylinder in the middle of the continuous transportation, reduction, melting, quantitative analysis according to the extruder's engine and die forming,Then in the whole process of traction belt and refrigeration, the shape of the craft is set and extracted according to the required length of a forming method, the die of the extruder determines the final appearance of the craft.

Select different die mouth and relative auxiliary machine equipment, can manufacture pipe fitting, bar material, plastic sheet, sheet, plastic film, wire drawing, nylon cable amorphous strip and other crafts, and actually core or hollow pvc profile, if equipped with two or two extruder and unique engine and die mouth, can make double or double layer about the same color,Not the same as the double-layer extrusion crafts composed of raw materials, this kind of processing process is called co-extrusion processing process, flame retardant plastic processing process can also make polyurethane foam and improve the raw materials or surface covered by plastic, fiber tube composed of other raw materials or acquisition materials of polymer materials.