Does the plastic tile screamer work well:

When laying tile, we must first leveling, and leveling method has 3 kinds, one is to use cement leveling, in laying tile.The second is to first play a layer of keel, and then lay a layer of joinery board, and then lay a solid wood composite floor.The third is to use ceramic tile leveling device, but there are many shortcomings in the use of ceramic tile leveling device, such as: when it is operated, it needs a item to measure, and it needs professionals to operate according to the specification, in order to play the real effect, so it is not very good.There is a need for leveling friends try to use the method of cement leveling, so that the effect is excellent.

How to use a tile screamer The screamer works very well.But only suitable for using tile glue brick, such as kitchen wall.If the living room ground also want to use this way tile, to do the ground leveling (error is less than 5mm), and then use tile glue shop.The transparent clip decides to leave the width of the seam, when you buy to mark (such as 2mm seam can only buy 2mm this specification of the clip) after use will be broken in the inside, can not be reused, red pin and caliper can be reused.You can find it by searching "tile-tiling artifacts" yourself.

How to use tile screamer and steps

What kind of floor tile is good?First, look at the surface color of the floor tile to check the quality of the floor tile itself and the quality of the paving paste only need to be found through careful observation, the floor tile itself quality is relatively poor need to replace the floor tile is mainly reflected in, the surface of the floor tile cracking uneven, the edges and corners of the floor tile, although the surface looks bright,However, there is a color difference on the surface of the glaze layer or the inclusion in the glaze layer or the glaze layer spots.The quality inspection of the floor tile is mainly to see whether the flatness of the overall surface is greater than two millimeters in the range of two meters, whether the joint height between bricks is greater than 0.5mm, and whether the joint flatness is more than 3mm in the length of 5m. If it exceeds the above data range, it is unqualified.Two, knock detection of floor tile inlaid with empty drum in the room, around the room with a small iron bar and other special inspection wall empty drum tools, gently hit the four corners and the middle of the floor tile, the sound is clear as no empty drum, if the problem of empty drum detected, it should be marked, timely eradication and replacement of the floor tile.Three, splash water on the floor tile detection in the kitchen, bathroom drainage slope requirements of the floor tile shop, in the check whether the water is smooth, a large number of water on the upper slope can be detected.After pouring water on it, wait for a moment, and see where there is water that indicates that the floor tile is uneven, or the slope to the water is not enough.

Does the tile screamer work

This is the product of the advanced small technology of foreign tile laying. Although it is small, the road effect is large, it can make the tile laying flat and there is no ladder between the joints.And it works.I hope my answer can help you

Is this how you apply tiles with a tile screeper?Let's see if this is the right thing to do?

1, first in the cement ground watering, and so on the second day, with cement mortar leveling difficulty to see the original post;>

How to level floors and tiles?

First of all, in the use of the living room floor tile, bedroom floor, will need to use the door stone to excessive, and often in the decoration process of the floor tile process to far ahead of the floor, and the area of the floor tile does not need to do a leveling.1: First of all, we should choose the style and thickness of the floor, and tell the decoration company.2: According to the thickness of the floor at home, the door stone and the floor tile are as good as the acceptance. As long as the height of the floor is equal to the height of the door stone, the height of the floor and the door stone can be determined to be OK.3: According to the height of the door stone and then the height of the floor tile with it as a reference!